Programmable Water Sorption through Linker Installation into a Zirconium Metal-Organic Framework.

Hydrolytically stable materials exhibiting a wide range of programmable water sorption behaviors are crucial for on-demand water sorption systems. While notable advancements in employing metal-organic frameworks (MOFs) as promising water adsorbents have been made, developing a robust yet easily tailorable MOF scaffold for specific operational conditions remains a challenge. To address this demand, we employed a topology-guided linker installation strategy using NU-600, which is a zirconium-based MOF (Zr-MOF) that contains three vacant crystallographically defined coordination sites. Through a judicious selection of three N-heterocyclic auxiliary linkers of specific lengths, we installed them into designated sites, giving rise to six new MOFs bearing different combinations of linkers in predetermined positions. The resulting MOFs, denoted as NU-606 to NU-611, demonstrate enhanced structural stability against capillary force-driven channel collapse during water desorption due to the increased connectivity of the Zr6 clusters in the resulting MOFs. Furthermore, incorporating these auxiliary linkers with various hydrophilic N sites enables the systematic modulation of the pore-filling pressure from about 55% relative humidity (RH) for the parent NU-600 down to below 40% RH. This topology-driven linker installation strategy offers precise control of water sorption properties for MOFs, highlighting a facile route to design MOF adsorbents for use in water sorption applications.

Biomimetic Mineralization of Large Enzymes Utilizing a Stable Zirconium-Based Metal-Organic Frameworks.

Enzymes are natural catalysts for a wide range of metabolic chemical transformations, including selective hydrolysis, oxidation, and phosphorylation. Herein, we demonstrate a strategy for the encapsulation of enzymes within a highly stable zirconium-based metal-organic framework. UiO-66-F4 was synthesized under mild conditions using an enzyme-compatible amino acid modulator, serine, at a modest temperature in an aqueous solution. Enzyme@UiO-66-F4 biocomposites were then formed by an in situ encapsulation route in which UiO-66-F4 grows around the enzymes and, consequently, provides protection for the enzymes. A range of enzymes, namely, lysozyme, horseradish peroxidase, and amano lipase, were successfully encapsulated within UiO-66-F4. We further demonstrate that the resulting biocomposites are stable under conditions that could denature many enzymes. Horseradish peroxidase encapsulated within UiO-66-F4 maintained its biological activity even after being treated with the proteolytic enzyme pepsin and heated at 60 °C. This strategy expands the toolbox of potential metal-organic frameworks with different topologies or functionalities that can be used as enzyme encapsulation hosts. We also demonstrate that this versatile process of in situ encapsulation of enzymes under mild conditions (i.e., submerged in water and at a modest temperature) can be generalized to encapsulate enzymes of various sizes within UiO-66-F4 while protecting them from harsh conditions (i.e., high temperatures, contact with denaturants or organic solvents).

Thermodynamic Insights into Phosphonate Binding in Metal-Azolate Frameworks.

Organophosphorus chemicals, including chemical warfare agents (CWAs) and insecticides, are acutely toxic materials that warrant capture and degradation. Metal-organic frameworks (MOFs) have emerged as a class of tunable, porous, crystalline materials capable of hydrolytically cleaving, and thus detoxifying, several organophosphorus nerve agents and their simulants. One such MOF is M-MFU-4l (M = metal), a bioinspired azolate framework whose metal node is composed of a variety of divalent first-row transition metals. While Cu-MFU-4l and Zn-MFU-4l are shown to rapidly degrade CWA simulants, Ni-MFU-4l and Co-MFU-4l display drastically lower activities. The lack of reactivity was hypothesized to arise from the strong binding of the phosphate product to the node, which deactivates the catalyst by preventing turnover. No such study has provided detailed insight into this mechanism. Here, we leverage isothermal titration calorimetry (ITC) to monitor the binding of an organophosphorus compound with the M-MFU-4l series to construct a complete thermodynamic profile (Ka, ΔH, ΔS, ΔG) of this interaction. This study further establishes ITC as a viable technique to probe small differences in thermodynamics that result in stark differences in material properties, which may allow for better design of first-row transition metal MOF catalysts for organophosphorus hydrolysis.

Effective Strategy toward Obtaining Reliable Breakthrough Curves of Solid Adsorbents.

Metal-organic frameworks (MOFs) have demonstrated their versatility in a wide range of applications, including chemical separation, gas capture, and storage. In industrial adsorption processes, MOFs are integral to the creation of selective gas adsorption fixed beds. In this context, the assessment of their separation performance under relevant conditions often relies on breakthrough experiments. One aspect frequently overlooked in these experiments is the shaping of MOF powders, which can significantly impact the accuracy of breakthrough results. In this study, we present an approach for immobilizing MOF particles on the surface of glass beads (GBs) utilizing trimethylolpropane triglycidyl ether (TMPTGE) as a binder, leading to the creation of MOF@GB materials. We successfully synthesized five targeted MOF composites, namely, SIFSIX-3-Ni@GB, CALF-20@GB, UiO-66@GB, HKUST-1@GB, and MOF-808@GB, each possessing distinct pore sizes and structural topologies. Characterization studies employing powder X-ray diffraction and adsorption isotherm analyses demonstrated that MOFs@GB retained their crystallinity and 73-90% of the Brunauer-Emmett-Teller area of their parent MOFs. Dynamic breakthrough experiments revealed that, in comparison to their parent MOFs, MOF@GB configurations enhanced the accuracy of breakthrough measurements by mitigating pressure buildup and minimizing reductions in the gas flow rate. This work underscores the significance of meticulous experimental design, specifically in shaping MOF powders, to optimize the efficacy of breakthrough experiments. Our proposed strategy aims to provide a versatile platform for MOF powder processing, thereby facilitating more reliable breakthrough experiments.

Robust Carborane-Based Metal-Organic Frameworks for Hexane Separation.

Hexane isomers play a vital role as feedstocks and fuel additives in the petrochemical industry. However, their similar physical and chemical properties lead to significant challenges in the separation process. Traditional thermal separation techniques are energy-intensive and lead to significant carbon footprint penalties. As such, there is a growing demand for the development of less energy-intensive nonthermal separation methods. Adsorption-based separation methods, such as using solid sorbents or membranes, have emerged as promising alternatives to distillation. Here, we report the successful synthesis of two novel metal-organic frameworks (MOFs), NU-2004 and NU-2005, by incorporating a carborane-based three-dimensional (3D) linker and using aluminum and vanadium nodes, respectively. These MOFs exhibit exceptional thermal stability and structural rigidity compared to other MIL-53 analogues, which is further corroborated using synchrotron studies. Furthermore, the inclusion of the quasi-spherical 3D linker in NU-2004 demonstrates significant advancements in the separation of hexane isomers compared to other MIL MOFs containing two-dimensional (2D) and aliphatic 3D linkers.

Rationally Tailored Mesoporous Hosts for Optimal Protein Encapsulation.

Proteins play important roles in the therapeutic, medical diagnostic, and chemical catalysis industries. However, their potential is often limited by their fragile and dynamic nature outside cellular environments. The encapsulation of proteins in solid materials has been widely pursued as a route to enhance their stability and ease of handling. Nevertheless, the experimental investigation of protein interactions with rationally designed synthetic hosts still represents an area in need of improvement. In this work, we leveraged the tunability and crystallinity of metal-organic frameworks (MOFs) and developed a series of crystallographically defined protein hosts with varying chemical properties. Through systematic studies, we identified the dominating mechanisms for protein encapsulation and developed a host material with well-tailored properties to effectively encapsulate the protein ubiquitin. Specifically, in our mesoporous hosts, we found that ubiquitin encapsulation is thermodynamically favored. A more hydrophilic encapsulation environment with favorable electrostatic interactions induces enthalpically favored ubiquitin-MOF interactions, and a higher pH condition reduces the intraparticle diffusion barrier, both leading to a higher protein loading. Our findings provide a fundamental understanding of host-guest interactions between proteins and solid matrices and offer new insights to guide the design of future protein host materials to achieve optimal protein loading. The MOF modification technique used in this work also demonstrates a facile method to develop materials easily customizable for encapsulating proteins with different surface properties.

Programmed Polarizability Engineering in a Cyclen-Based Cubic Zr(IV) Metal-Organic Framework to Boost Xe/Kr Separation.

Efficient separation of xenon (Xe) and krypton (Kr) mixtures through vacuum swing adsorption (VSA) is considered the most attractive route to reduce energy consumption, but discriminating between these two gases is difficult due to their similar properties. In this work, we report a cubic zirconium-based MOF (Zr-MOF) platform, denoted as NU-1107, capable of achieving selective separation of Xe/Kr by post-synthetically engineering framework polarizability in a programmable manner. Specifically, the tetratopic linkers in NU-1107 feature tetradentate cyclen cores that are capable of chelating a variety of transition-metal ions, affording a sequence of metal-docked cationic isostructural Zr-MOFs. NU-1107-Ag(I), which features the strongest framework polarizability among this series, achieves the best performance for a 20:80 v/v Xe/Kr mixture at 298 K and 1.0 bar with an ideal adsorbed solution theory (IAST) predicted selectivity of 13.4, placing it among the highest performing MOF materials reported to date. Notably, the Xe/Kr separation performance for NU-1107-Ag(I) is significantly better than that of the isoreticular, porphyrin-based MOF-525-Ag(II), highlighting how the cyclen core can generate relatively stronger framework polarizability through the formation of low-valent Ag(I) species and polarizable counteranions. Density functional theory (DFT) calculations corroborate these experimental results and suggest strong interactions between Xe and exposed Ag(I) sites in NU-1107-Ag(I). Finally, we validated this framework polarizability regulation approach by demonstrating the effectiveness of NU-1107-Ag(I) toward C3H6/C3H8 separation, indicating that this generalizable strategy can facilitate the bespoke synthesis of polarized porous materials for targeted separations.

Sulfated Zirconium Metal-Organic Frameworks as Well-Defined Supports for Enhancing Organometallic Catalysis.

Understanding heterogeneous catalysts is a challenging pursuit due to surface site nonuniformity and aperiodicity in traditionally used materials. One example is sulfated metal oxides, which function as highly active catalysts and as supports for organometallic complexes. These applications are due to traits such as acidity, ability to act as a weakly coordinating ligand, and aptitude for promoting transformations via radical cation intermediates. Research is ongoing about the structural features of sulfated metal oxides that imbue the aforementioned properties, such as sulfate geometry and coordination. To better understand these materials, metal-organic frameworks (MOFs) have been targeted as structurally defined analogues. Composed of inorganic nodes and organic linkers, MOFs possess features such as high porosity and crystallinity, which make them attractive for mechanistic studies of heterogeneous catalysts. In this work, Zr6-based MOF NU-1000 is sulfated and characterized using techniques such as single crystal X-ray diffraction in addition to diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The dynamic nature of the sulfate binding motif is found to transition from monodentate, to bidentate, to tridentate depending on the degree of hydration, as supported by density functional theory (DFT) calculations. Heightened Brønsted acidity compared to the parent MOF was observed upon sulfation and probed through trimethylphosphine oxide physisorption, ammonia sorption, in situ ammonia DRIFTS, and DFT studies. With the support structure benchmarked, an organoiridium complex was chemisorbed onto the sulfated MOF node, and the efficacy of this supported catalyst was demonstrated for stoichiometric and catalytic activation of benzene-d6 and toluene with structure-activity relationships derived.

Leveraging Isothermal Titration Calorimetry to Explore Structure-Property Relationships of Protein Immobilization in Metal-Organic Frameworks.

Proteins immobilized in metal-organic frameworks (MOFs) often show extraordinary stability. However, most efforts to immobilize proteins in MOFs have only been exploratory. Herein, we present the first systematic study on the thermodynamics of protein immobilization in MOFs. Using insulin as a probe, we leveraged isothermal titration calorimetry (ITC) to investigate how topology, pore size, and hydrophobicity of MOFs influence immobilization. ITC data obtained from the encapsulation of insulin in a series of Zr-MOFs reveals that MOFs provide proteins with a hydrophobic stabilizing microenvironment, making the encapsulation entropically driven. In particular, the pyrene-based NU-1000 tightly encapsulates insulin in its ideally sized mesopores and stabilizes insulin through π-π stacking interactions, resulting in the most enthalpically favored encapsulation process among this series. This study reveals critical insights into the structure-property relationships of protein immobilization.

Leveraging Isothermal Titration Calorimetry to Obtain Thermodynamic Insights into the Binding Behavior and Formation of Metal-Organic Frameworks.

Isothermal titration calorimetry (ITC) is a technique which directly measures the thermodynamic parameters of binding events. Although historically it has been used to investigate interactions in biological macromolecules and the kinetics of enzyme-catalyzed reactions, ITC has also been demonstrated to provide relevant thermodynamic information about interactions in synthetic systems, such as those in metal-organic frameworks (MOFs). MOFs are a family of crystalline porous materials that have been widely studied as supports for molecules ranging from gases to biomolecules through physisorption and chemisorption. Herein, we offer a perspective on the current applications of ITC in MOFs, including the mechanism of small molecule adsorption and the formation of MOF-based composite materials through noncovalent interactions. Experimental considerations specific to running ITC experiments in MOF systems are reviewed on the basis of existing reports. We conclude by discussing underexplored, but promising, MOF-related research directions which could be elucidated by ITC.

A Catalytically Accessible Polyoxometalate in a Porous Fiber for Degradation of a Mustard Gas Simulant.

Polyoxometalates (POMs) are versatile materials for chemical catalysis due to their tunable acidity and rich redox properties. While POMs have attracted significant attention in homogeneous catalysis, challenges regarding aggregation and instability in solvents often prevent the wide implementation of POMs as heterogeneous catalysts. Therefore, the successful incorporation of a POM into a solid support, such as a polymer, is desirable for practical applications where unique functionalities of the POM combine with the advantages of the polymer. In this work, we showcase how polymers of intrinsic microporosity (PIMs) can serve as matrices for anchoring a pure inorganic Keggin-type POM (H3PW12O40) to fabricate PIM-based composite materials. Specifically, we found that PIMs installed with amidoxime functionalities could successfully attach POMs (PW12@PIM-1-AO) without self-segregation. Furthermore, we fabricated porous fibrous mats via electrospinning of the PIM-POM composites. Comprehensive characterization confirmed the integrity of the POM in the composite material. Following this, we demonstrated that the incorporated POMs in the composite fibers maintained their innate catalytic activity for the oxidative degradation of 2-chloroethyl ethyl sulfide, a sulfur mustard simulant, in the presence of hydrogen peroxide as the oxidant. Ultimately, our work highlights that PIM-based hybrid materials provide a potential route for implementing these reactive fiber mats into protective equipment.

Water Sorption Evolution Enabled by Reticular Construction of Zirconium Metal-Organic Frameworks Based on a Unique [2.2]Paracyclophane Scaffold.

Water vapor sorption by metal-organic frameworks (MOFs) has gathered significant interest because of its prominent potential in many applications such as moisture harvesting, dehumidification, heat pump regulation, and hydrolysis catalysis. However, the reticular design and exploration of robust and high-performing Zr-MOFs for such purposes remains a sought-after endeavor. In this work, we present the deployment of reticular chemistry to target a series of robust Zr-MOFs based on a unique [2.2]paracyclophane (PCP) scaffold. The ease of functionalization of PCP enables the desired synthesis of three carboxylate linkers, one ditopic and two tetratopic, which further assemble into a total of five Zr-MOFs with distinct topological structures, i.e., a new 2D net (NU-700), fcu (NU-405), flu (NU-1800), she (NU-602), scu (NU-913). Notably, the water vapor sorption performances of all the Zr-MOFs are highly dependent on their framework topology and pore metric, in which NU-602 and NU-913 with uniform 1D channels exhibit S-shaped water sorption isotherms with a steep pore-filling step and high uptake capacities of 0.72 g g-1 at 70% relative humidity (RH) and 0.88 g g-1 at 60% RH, respectively. Moreover, NU-913 displays exceptionally high working capacity of 0.72 g g-1 in the range of 40-60% RH. Additionally, we demonstrate that the hydrolytic stability and water adsorption-desorption recyclability of NU-913 can be remarkably improved by capping the Zr6 nodes with the more hydrophobic agent, trifluoroacetic acid, making it a potential candidate for water sorption-based applications.

Stabilization of an enzyme cytochrome c in a metal-organic framework against denaturing organic solvents.

Enzymes are promising catalysts with high selectivity and activity under mild reaction conditions. However, their practical application has largely been hindered by their high cost and poor stability. Metal-organic frameworks (MOFs) as host materials show potential in protecting proteins against denaturing conditions, but a systematic study investigating the stabilizing mechanism is still lacking. In this study, we stabilized enzyme cytochrome c (cyt c) by encapsulating it in a hierarchical mesoporous zirconium-based MOF, NU-1000 against denaturing organic solvents. Cyt c@NU-1000 showed a significantly enhanced activity compared to the native enzyme, and the composite retained this enhanced activity after treatment with five denaturing organic solvents. Moreover, the composite was recyclable without activity loss for at least three cycles. Our cyt c@NU-1000 model system demonstrates that enzyme@MOF composites prepared via post-synthetic encapsulation offer a promising route to overcome the challenges of enzyme stability and recyclability that impede the widespread adoption of biocatalysis.

Insights into the Enhanced Catalytic Activity of Cytochrome c When Encapsulated in a Metal-Organic Framework.

The encapsulation of enzymes within porous materials has shown great promise, not only in protecting the enzymes from denaturation under nonbiological environments, but also, in some cases, in facilitating their enzymatic reaction rates at favorable reaction conditions. While a number of hypotheses have been developed to explain this phenomenon, the detailed structural changes of the enzymes upon encapsulation within the porous material, which are closely related to their activity, remain largely elusive. Herein, the structural change of cytochrome c (Cyt c) upon encapsulation within a hierarchical metal-organic framework, NU-1000, is investigated through a combination of experimental and computational methods, such as electron paramagnetic resonance, solid-state ultraviolet-visible spectroscopy, and all-atom explicit solvent molecular dynamics simulations. The enhanced catalytic performance of Cyt c after being encapsulated within NU-1000 is supported by the physical and in silico observations of a change around the heme ferric active center.

Catalytic intramolecular hydroamination of aminoallenes using titanium and tantalum complexes of sterically encumbered chiral sulfonamides.

Catalysis using earth abundant metals is an important goal due to the relative scarcity and expense of precious metal catalysts. It would be even more beneficial to use earth abundant catalysts for the synthesis of common pharmaceutical structural motifs such as pyrrolidine and pyridine. Thus, developing titanium catalysts for asymmetric ring closing hydroamination is a valuable goal. In this work, four sterically encumbered chiral sulfonamides derived from naturally occurring amino acids were prepared. These compounds undergo protonolysis reactions with Ti(NMe2)4 or Ta(NMe2)5 to give monomeric complexes as determined by both DOSY NMR and X-ray crystallography. The resulting complexes are active for the ring closing hydroamination hepta-4,5-dienylamine to give a mixture of tetrahydropyridine and pyrrolidine products. However, the titanium complexes convert 6-methylhepta-4,5-dienylamine exclusively to 2-(2-methylpropenyl)pyrrolidine in higher enantioselectivity than those previously reported, with enantiomeric excesses ranging from 18-24%. The corresponding tantalum complexes were more selective with enantiomeric excesses ranging from 33-39%.

4-Fluoro-2-({[(2R)-1-hy-droxy-1,1,3-tri-phenyl-propan-2-yl]imino}-meth-yl)phenol.

The title compound, C28H24FNO2, crystallizes in the ortho-rhom-bic space group P212121. A hydrogen-bonding network between the tertiary alcohol group and the fluoro substituent results in [010] chains in the solid state.

Catalytic intramolecular hydroamination of aminoallenes using titanium complexes of chiral, tridentate, dianionic imine-diol ligands.

Alkylation of d- or l-phenylalanine or valine alkyl esters was carried out using methyl or phenyl Grignard reagents. Subsequent condensation with salicylaldehyde, 3,5-di-tert-butylsalicylaldehyde, or 5-fluorosalicylaldehyde formed tridentate, X2L type, Schiff base ligands. Chiral shift NMR confirmed retention of stereochemistry during synthesis. X-ray crystal structures of four of the ligands show either inter- or intramolecular hydrogen bonding interactions. The ligands coordinate to the titanium reagents Ti(NMe2)4 or TiCl(NMe2)3 by protonolysis and displacement of two equivalents of HNMe2. The crystal structure of one example of Ti(X2L)Cl(NMe2) was determined and the complex has a distorted square pyramidal geometry with an axial NMe2 ligand. The bis-dimethylamide complexes are active catalysts for the ring closing hydroamination of di- and trisubstituted aminoallenes. The reaction of hepta-4,5-dienylamine at 135 °C with 5 mol% catalyst gives a mixture of 6-ethyl-2,3,4,5-tetrahydropyridine (40-72%) and both Z- and E-2-propenyl-pyrrolidine (25-52%). The ring closing reaction of 6-methyl-hepta-4,5-dienylamine at 135 °C with 5 mol% catalyst gives exclusively 2-(2-methyl-propenyl)-pyrrolidine. The pyrrolidine products are obtained with enantiomeric excesses up to 17%.